Abstract
In this research, the effect of adding some natural wastes to gypsum was studied in order to use them as thermal insulation materials in buildings and to recycle these wastes. Thermal insulation panels were installed from gypsum (as a basic material) and natural wastes (sawdust, peanut shells, wheat straw, cottonwood) at percentages (10, 15, 20) %, and some of their mechanical and physical properties, and their thermal conductivity were studied. The results indicated an improvement in some properties of gypsum after adding wastes, and obtaining thermal building materials that have better properties than the reference sample (gypsum) in some cases. Rough sawdust samples (SdR15, SdR20) achieved the highest compressive strength exceeding (4MPa). The flexural strength was for peanut shells samples (P10:1.76 MPa, P15:1.8 MPa), while the most efficient samples as thermal insulation were ground straw and smooth sawdust samples (SdS15, SdS20, GSt15, GSt20) where their thermal conductivity was (0.194-0.141W/m.K), which makes it acceptable according to the Syrian thermal insulation code.
Highlights
In this research, the effect of adding some natural wastes to gypsum was studied in order to use them as thermal insulation materials in buildings and to recycle these wastes
Thermal insulation panels were installed from gypsum and natural wastes at percentages (10, 15, 20) %, and some of their mechanical and physical properties, and their thermal conductivity were studied
The results indicated an improvement in some properties of gypsum after adding wastes, and obtaining thermal building materials that have better properties than the reference sample in some cases
Summary
The effect of adding some natural wastes to gypsum was studied in order to use them as thermal insulation materials in buildings and to recycle these wastes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.