Abstract
An investigation was carried out on the effect of airflow from the blade of a piezoelectric fan on the main cooling airflow across a pin-fin heat sink. The study considered the respective orientation and distances between the piezoelectric blade and the heat sink in a rectangular channel where the airflow was uniform and axial. Three different pin-fin heat sinks with in-line pin-fin arrays were used: 5´5, 7´7 and 9´9. Variable parameters included the Reynolds number of the main airflow and the relative position of the piezoelectric blade and the heat sink. The results showed that the smaller the horizontal distance between the blade and the heat sink, or the greater the vertical distance between the piezoelectric blade and the channel floor, the better the total heat transfer enhancement. Of the three heat sinks used, the 9´9 unit coupled with transverse oscillation of the piezoelectric blade had a slightly higher heat-transfer ratio enhancement. The heat-transfer enhancement ratio Nu/Nu 0 (Nu 0 is the Nusselt number of the system without the piezoelectric blade) will gradually approach 1 with an increase of the Reynolds number of the main flow. At Re L =1200, and with the assistance of the piezoelectric blade, the maximum value of Nu/Nu 0 for the 9´9 pin-fin heat sink exceeded 2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
