The driving force of water absorption in cementitious materials: An analysis of surface-free energies and pore structure

Abstract

Upon the initial contact of hydrophilic cementitious materials with water, capillary absorption becomes the dominant phenomenon leading to durability deterioration of structures. The water absorption characteristics of such materials are governed by the interplay between pore structure and surface-free energies, with the latter being a factor often overlooked. In this study, advanced inverse gas chromatography (IGC) measurement techniques were employed to investigate the one-dimensional capillary water absorption of ordinary Portland cement (OPC) and alkali-activated slag (AAS). Results revealed water sorptivity values for OPC, AAS(NaOH), and AAS(Waterglass) as 0.0112, 0.0137, and 0.0187 mm/s0.5, respectively. This phenomenon can be attributed to the higher total surface-free energies observed at the liquid-solid interface in AAS materials, measuring 100.10 and 119.56 mJ/m2, compared with 74.25 mJ/m2 for OPC, consequently increasing capillary pressures. Moreover, it is observed that OPC exhibited a more complex pore tortuosity in comparison to AAS. This study underscores the dual role played by both capillary pressures and pore tortuosity in determining the water absorption characteristics of cementitious materials.