Abstract

Abstract. The urban heat island (UHI) over Paris during summer 2006 was simulated using the Advanced Regional Prediction System (ARPS) updated with a simple urban parametrization at a horizontal resolution of 1 km. Two integrations were performed, one with the urban land cover of Paris and another in which Paris was replaced by cropland. The focus is on a five-day clear-sky period, for which the UHI intensity reaches its maximum. The diurnal evolution of the UHI intensity was found to be adequately simulated for this five day period. The maximum difference at night in 2 m temperature between urban and rural areas stemming from the urban heating is reproduced with a relative error of less than 10%. The UHI has an ellipsoidal shape and stretches along the prevailing wind direction. The maximum UHI intensity of 6.1 K occurs at 23:00 UTC located 6 km downstream of the city centre and this largely remains during the whole night. An idealized one-column model study demonstrates that the nocturnal differential sensible heat flux, even though much smaller than its daytime value, is mainly responsible for the maximum UHI intensity. The reason for this nighttime maximum is that additional heat is only affecting a shallow layer of 150 m. An air uplift is explained by the synoptic east wind and a ramp upwind of the city centre, which leads to a considerable nocturnal adiabatic cooling over cropland. The idealized study demonstrates that the reduced vertical adiabatic cooling over the city compared to cropland induces an additional UHI build-up of 25%. The UHI and its vertical extent is affected by the boundary-layer stability, nocturnal low-level jet as well as radiative cooling. Therefore, improvements of representing these boundary-layer features in atmospheric models are important for UHI studies.

Highlights

  • Urban heat island (UHI)Inesfftercut.mUerbnantastuirofances distinguish themselves from their naturMal seutrhrooudndsinagsnbdy particular urbetanals.,u2rf0a0c8e),cahalorawceterreidstvicesgDleitkaaetitioanncSrceoayvsseerdteatnhmderismmapleirnveiortuias

  • A base run is performed in which the present-day surface characteristics are represented, and an additional scenario run in which the urban surface is replaced by cropland

  • A 5-day period is analysed for which the urban heat island (UHI) intensity is high

Read more

Summary

Introduction

Urban heat island (UHI)Inesfftercut.mUerbnantastuirofances distinguish themselves from their naturMal seutrhrooudndsinagsnbdy particular urbetanals.,u2rf0a0c8e),cahalorawceterreidstvicesgDleitkaaetitioanncSrceoayvsseerdteatnhmderismmapleirnveiortuias Accounting for the UHI is important when studying the effect of land-use change (e.g. forest to croplands, or vegetation global cover scale to or urban to test mlaOintdicg)aeotinaoncnlsitmSraatcteegieoienns t(chee.egm. The inclusion of urban effects can serve to improve weather forecasts as shown in Hamdi et al (2012). In this respect, it is indispensable to fully understand all the boundarylayer processes that contributSe too ltihde UEHaI.rth. The aim of this paper is to investigate the dominant heating terms that contribute to the maximum UHI intensity, and

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call