Abstract

A sequential digestion method is reported for the direct determination of sulphate, pyrite and organic sulphur concentrations in coals of either bituminous or sub-bituminous rank. A three stage extraction was developed, using acid digestion in a microwave oven. In the first stage, 5 M HCl is used to dissolve sulphate phases in the coal. Pyrite is then extracted from the stage 1 residue using 2 M HNO 3. The final stage, for the determination of organic sulphur, involves the use of concentrated HNO 3, HCl, HF and boric acid for the complete decomposition of residue that remains following stage 2. The extract solutions from each stage are rapidly analysed for sulphur using i.c.p.-a.e.s. The sums of the three forms of sulphur have shown consistent agreement with certified total sulphur data for most of the coals studied. This correlation, in addition to the good precision achieved by this technique, suggests that the sequential digestion method is reliable. Furthermore, significant timesavings are achievable over some of the standard techniques demonstrating the suitability of the method for routine analyses.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.