Abstract
The Appearance function, also known as breakage distribution function, is used to describe the breakage characteristics of an ore impacted with a certain energy. It is the bedrock of comminution modelling. The range of applicability of the majority of existing appearance functions is limited to coarser sizes above a few millimetres. In the previous work, a 4D (four dimensional) appearance function model was developed based on JKRBT test data, but its applicable range was not sufficiently broad at −24.4+7.3mm. In order to develop a more versatile appearance function model that can be used for a wide range of energy levels and feed particle sizes, drop weight tests for smaller particles with sizes ranging from 425μm to 16mm were carried out with the Mini JK drop weight tester. Combined with data up to 63mm from Standard JK Drop Weight Tests, the outcomes were fitted to two types of 4D appearance functions - the P80-m based 4D model and the P80-m-q based 4D model. The proposed 4D models are more accurate and scalable than existing models. Most importantly, they can be used for a wide range of conditions, with feed particle size ranging from 425μm to 63mm and input specific energy from 0.1 to 2.5kWh/t in the initial test data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
