Abstract
The aim of this study is to develop bioplastic film from a combination of two biopolymers of same source, namely banana peel and corn starch. Five banana peel films (BP film) were prepared with different concentrations of corn starch (1% up to 5%) as co-biopolymer and film without corn starch acted as a control. The films were carried out with several durability tests and characterization analyses. Based on the results obtained, the BP film with 4% corn starch gave the highest tensile strength 34.72 N/m2 compared to other samples. The water absorption test showed that BP films with 3% corn starch were resistant to water uptake by absorbing water up to 60.65%. In terms of characterization, spectra of Fourier Transform Infrared Spectroscopy (FTIR) obtained for BP control film and BP film with 4% corn starch were comparable with most of the peaks were present. The thermal analysis by differential screening calorimetric (DSC) detected the melting temperature for both BP control film and BP film with 4% corn respectively at Tonset of 54.41°C and 67.83°C. Overall, combination of starches from two different sources can be used as an alternative in producing bioplastics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
