The development of an herbal material quality control strategy considering the effects of manufacturing processes

Abstract

BackgroundQuality by design (QbD) is an advanced drug quality control concept that has been gradually implemented in the optimization of manufacturing processes of Chinese medicines. However, the variation of Chinese medicinal material quality has rarely been considered in published works. Because manufacturing processes may lower the variation introduced through different batches of materials, a material quality control strategy should be developed considering the influences of manufacturing processes.MethodsIn this work, the processes of extraction, concentration, water precipitation, and chromatography for notoginseng total saponin (NTS) production were investigated while considering Panax notoginseng quality variation as a sample. Ten process parameters were studied simultaneously using a definitive screening design. After the process critical quality attributes (CQAs) were determined, critical process parameters (CPPs) and critical material attributes (CMAs) were identified simultaneously. Then, models utilizing the CMAs, CPPs, and process CQAs were developed. The design space was then calculated using a Monte Carlo simulation method with an acceptable probability of 0.90. A material quality control strategy considering the influences of manufacturing processes was proposed.ResultsThe ginsenoside Rd purity and total saponin purity in the eluate were identified as process CQAs. The ethanol solution concentration used for extraction, the ethanol solution concentration used for elution, and elution time were identified as CPPs. The extractable dry matter content of Panax notoginseng was one of the CMAs. The extractable contents of notoginsenoside R1, ginsenoside Rg1, ginsenoside Rb1, and ginsenoside Rd were the other CMAs. The inequalities implemented to discriminate the high quality and low quality of Panax notoginseng were developed according to the NTS standard of the Xuesaitong injection. Low quality Panax notoginseng should not be released for NTS production. High quality Panax notoginseng can be treated with feasible manufacturing processing parameters. Verification experiments were carried out successfully for 2 batches of high quality Panax notoginseng.ConclusionsIn this work, a quality control strategy for herbal materials was developed considering the matching of process characteristics and material quality attributes. This strategy is promising for application to other Chinese medicines.