Abstract
In textile and wearable electronics, the demand for a stretchable, durable, and easily manufacturable electrode is ever increasing. This paper describes the development of a highly stretchable and durable textile electrode fabricated by simple stencil and screen printing methods. It specifically investigated the effects of an interface layer as a planarization layer between the conductive electrode and the textile on the durability of the textile electrode. A stretchable conductive paste was synthesized by mixing Ag flake powder in polyester. The conductive electrode was encapsulated with Ecoflex material. The stretchability and durability of the textile electrodes were evaluated via stretching, bending, Massachusetts Institute of Technology (MIT) folding, twisting, and dynamic endurance tests. The stretching and MIT folding tests indicated that the interface layer significantly enhanced the durability of the textile electrode. A highly stretchable and flexible textile electrode exhibited a low sheet resistance of 0.05 Ω/square, excellent stretchability of 70%, and a critical bending radius of 1.5 mm. The textile electrodes also withstood dynamic stretching and bending endurance tests of 10,000 cycles. The illumination of a light-emitting diode with the conductive electrode was also stable under 70% tensile strain and in water. The potential application of the textile electrode as a strain sensor was demonstrated by applying it to a glove to detect finger motion. The strain sensors responded well to the finger motion, with considerable stability and repeatability.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have