Abstract
A functionally graded transition zone between a hard TiC coating and a WC–Co substrate, e.g. a cutting tool, can be formed over the range composition of the titanium carbide phase that extends from Ti 2C to TiC. The transition zone is formed by sputter deposition of a multilayer stack of nanometric TiC and Ti layers. The composition gradient within the carbide layer is generated by varying the relative thickness of the as-deposited Ti and TiC layers. A subsequent short diffusion treatment eliminates the interfaces between the adjacent layers, yet maintains an overall carbon composition gradient across the thickness of the coating. The relative thickness of the individual sputtered layers is adjusted to yield a low carbon composition in the coating close to the substrate and a stoichiometric composition near the external surface. The composition profile within the coating can be further optimized with respect to residual stresses that arise during cooling after the diffusion anneal. In the present work, different graded Ti–TiC profiles were deposited on WC–Co substrates in two steps. First, a 0.5-μm graded Ti–TiC multilayer was deposited followed by a 2.5-μm outer layer stoichiometric TiC. Scratch tests, carried out on the as-deposited and on the annealed coatings showed that the critical load and the wear resistance depended on the concentration profile within the transition layer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
