The determining role of carbon addition on mechanical performance of a non-equiatomic high-entropy alloy

Abstract

• The role of C on the microstructure and mechanical properties are discussed. • The microstructure of the tensile specimen interrupted at different tensile strains are examined by EBSD and TEM. The deformation mechanism of a C-doped iHEA with excellent mechanical properties is discussed. • The contributions of different strengthening mechanism to yield strength are calculated and the comprehensive strengthening mechanism is discussed. The mechanical properties and deformation mechanism of a C-doped interstitial high-entropy alloy (iHEA) with a nominal composition of Fe 49.5 Mn 29.7 Co 9.9 Cr 9.9 C 1 (at.%) were investigated. An excellent combination of strength and ductility was obtained by cold rolling and annealing. The structure of the alloy is consisted of FCC matrix and randomly distributed Cr 23 C 6 . For gaining a better understanding of deformation mechanism, EBSD and TEM were conducted to characterize the microstructure of tensile specimens interrupted at different strains. At low strain (2%), deformation is dominated by dislocations and their partial slip. With the strain increase to 20%, deformation-driven athermal phase transformation and dislocations slip are the main deformation mechanism. While at high strain of 35% before necking, deformation twins have been observed besides the HCP phase. The simultaneous effect of phase transformation (TRIP effect) and mechanical twins (TWIP effect) delay the shrinkage, and improve the tensile strength and plasticity. What's more, compared with the HEA without C addition, the yield strength of the C-doped iHEA has been improved, which can be attributed to the grain refinement strengthening and precipitation hardening. Together with the lattice friction and solid solution strengthening, the theoretical calculated values of yield strength match well with the experimental results.