The determination of plough draught—Part II the measurement and prediction of plough draught for two mouldboard shapes in three soil series

Abstract

Abstract The draught of a 3-furrow reversible plough fitted with two types of bodies was measured at five separate test sites. Each site was ploughed on four different days to provide a range of soil moisture contents. The plough was operated at three different speeds in sequence for each type of body. The horizontal and vertical forces transmitted to the tractor were measured on a three-point linkage dynamometer. Tachogenerators monitored tractor wheel speed and fifth wheel ground speed. Cone index and soil specific weight were recorded at 30 mm intervals throughout the top-soil profile. Cone index at median plough depth was found to be a satisfactory measure of soil strength for the prediction of plough draught. Characterising specific plough draught by soil cone index, specific weight, moisture content, plough mouldboard tail angle and ploughing speed provided predicted values in closer agreement with measured draught compared with earlier equations. The sensitivity of cone index to soil moisture content supports the use of the cone penetrometer as a practical monitor of soil conditions in the field and as a management tool for judging the opportune times for agricultural tillage operations.