The Determination of Noxes Emissions in Case of Manual Arc Welding Process with Coated Electrode

Abstract

The occupational risk assessment of a machine building company must cover each activity and workstation, taking into account each component of the production system (work system), each workload, work equipment and the work environment. This assessment is an extremely complicated and complex issue since the production system of such an enterprise is particularly complex and complicated. Welding assembly is a highly polluting technology process, especially of the atmosphere and soil. The formation of gases in the welding process is the result of burning of the electrodes, powders, forming the molten metal bath and making the weld seam. Welding operators are exposed to smoke and toxic gases resulting from the welding process, which can in many cases be hazardous to health. Many acute intoxications that may be caused by excessive exposure to or short exposure to smoke and gas resulting from the welding process have been studied over time. In the paper are presented the elements of risk related to the welding process and the most widespread occupational diseases that can occur in the ranges of the welding operators. The following are presented the noxious emissions from welding and are determined by a practical method the emission of noxious at welding deposition of a welding sample, using the manual arc welding process with coated electrode.