Abstract

The Detection Performance of the Dual-Sequence-Frequency-Hopping Signal via Stochastic Resonance Processing under Color Noise

Highlights

  • The Dual Sequence Frequency Hopping (DSFH) communication mode draw lessons from "the medium is the message" [1], [2]

  • With the reason that the f0 and the sample frequency fs are set as 1 kHz and 200 kHz, the intermediate frequency (IF) signal can be viewed as low frequency signal, which can be processed by Low-pass Filter (LF)

  • The noise processed by LF becomes color and nonGaussian, whose spectrum can be assumed as a Lorentzian form

Read more

Summary

Introduction

The Dual Sequence Frequency Hopping (DSFH) communication mode draw lessons from "the medium is the message" [1], [2]. How to raise the detection performance of the DSFH’s signal under color noise is the most factual problem. Some researchers apply the stochastic resonance (SR) to detect signals under color noise. SR as a nonlinear detector can transact parts of the noise energy to the signal [6,7,8], raising the detection performance lower than the threshold [9], which can expand the DSFH’s application further. The effects of color noise on DSFH signal processing have not yet explored sufficiently. We will deal with the DSFH signal processing by a bi-stable SR system subjected to the color noise. Via introducing the decision time, the periodic steady-state solution of FPE is obtained.

The Transmitted Signal of the DSFH
The Receptive Signal of the DSFH
The SR Processing of the Receptive Signal
The Detection Performance
Experimental Verification
The Time and Frequency Feature Analysis of the DSFH Signal via SR Processing
The PDF of the DSFH Signal via SR Processing
The Detection Performance of the DSFH Signal via SR Processing
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call