Abstract
This paper presents a method to design a high efficiency energy receiving coil for Micro-Ball endoscopy. The remained space for energy source is extremely small (below 6.6∗6.6∗6.6mm3) in Micro-Ball. Ferrite core is adopted to improve the coupling coefficient. Based on detailed analysis of power loss in the receiving coil, parameters such as number of turns, frequency, types of wires (solid wire or litz wire) was optimized to improve the quality factor of the receiving coil. Ultimately, the coupling coefficient has an improvement of 80%. Experiments shows that the quality factor of the receiving coil (a=b=6.6mm, h=6.6mm) can reach 47 with solid wire and 96 with litz wire at 1.5MHz. Hybrid resonant is proposed to fit in with the load of the Micro-Ball. The AC-AC transmission efficiency of the receiving coil with litz wire is 6.3% in the worst case.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
