The Design, Implementation, and Preliminary Results of a New Photodetector for the DIII–D Thomson Scattering Diagnostic

Abstract

A redesign of the Thomson scattering data acquisition system located on the DIII-D tokamak is undergoing its trial phase. The redesign was made necessary by several factors, including the desire to improve the quality of the acquired data. In addition, the previous generation system was based on CAMAC technology, which has become difficult to maintain and is no longer supported. A big part of this improved redesign comes from the use of faster electronics allowing for greatly improved background light subtraction, the main source of noise. The past system utilized LeCroy FERA CAMAC gated integrator modules for integration and digitization. The redesigned system takes a much more distributed approach. The new system consists of a number of subsystems, including photodetectors, digitizers, distribution panels, and timing circuits. The most significant upgrade was performed on the photodetector electronic assembly. A key feature was to make the units much more self-contained in regard to the preamplifier, background subtraction, integration, and bias circuits. The redesigned photodetectors and preliminary test results of the trial phase will be presented.