The design and operation of the SPHEX spheromak

Abstract

We describe the design and operation of the SPHEX spheromak device and present an overview of its behaviour. The plasma is formed by ejection from a magnetized Marshall gun, and can be sustained as long as the gun is energized. The plasma is divided into the annulus comprising the closed toroidal flux, linked with the open flux forming the central column. The column current is driven directly by the central gun electrode, and the toroidal current in the annulus is driven indirectly by a mechanism associated with a coherent n = 1 oscillation of the column. The configuration exemplifies the operation of the process of relaxation to a state of minimum magnetic energy, which leads to magnetic configurations similar to those observed; to sustain these configurations requires some mechanism of toroidal current drive. Associated with this is the amplification of the poloidal flux, which is typically a factor of about five larger than the flux generated by the gun solenoid; the constancy (to a first approximation) of this factor plays a controlling role in spheromak behaviour. In standard operating conditions there is a `hard' limit, set by the solenoid flux, on the current carried by the column; any current driven by the external circuit above this apparently does not emerge from the gun. Evidence is presented that the column current is carried largely (> 50%) by accelerated ions with energy up to the gun voltage ( for a typical gun current of 60 kA). These ions are poorly magnetized and can escape across the magnetic field to the wall, a likely mechanism for the observed `loss' of current. Hydrogen is the normal operating gas: other gases ( and He) have been used, but the current drive is found to be less effective than in , with lower toroidal current maintained in the annulus.