The crosslinking and mechanical properties of SBR compounds with the addition of carburized pine nut cone ash

Abstract

In this study, four different pulps were prepared by adding 0%, 5%, 10%, and 15% carburized pine nut cone ash to a reference rubber compound based on styrene butadiene rubber (SBR). After vulcanization, the hardness, density, tensile strength, percentage elongation, tearing strength, and crosslink density of the compound were measured. In addition, the effects of the crosslink density on the mechanical properties were examined. The properties of the carburized pine nut cone ash compounds were evaluated both among themselves and comparatively with the physical and mechanical properties of the reference compound. In addition, it increased the hardness as well as the crosslink density, and it was shown to provide advantages in terms of its density, tensile strength, tearing strength, and percentage elongation properties. Furthermore, the fracture surfaces of the compounds were characterized via scanning electron microscopy and energy dispersion spectroscopy to explain the change in mechanical properties.