Abstract
AbstractThe influence of structural recovery or physical aging on the craze initiation of amorphous polystyrene and a styrene‐acrylonitrile copolymer has been examined in two states of stress/deformation and at different temperatures. Studies of craze initiation in equibiaxial creep were performed using a “bubble” inflation test geometry while uniaxial elongation in stress relaxation conditions was studied by bending the specimen over a variable radius of a curvature test jig. All tests were performed by aging the specimen and testing it at the same temperature subsequent to a quench from above the glass transition to below it. The results are compared with expectations from three craze models: Sternstein and Ongchin (1), Argon (2), and Kambour (3). The results are most consistent with the model of Kambour, but discrepancies arise because, e.g., the impact of aging on the stress for crazing in the equibiaxial tests is different for the polystyrene than for the styrene‐acrylonitrile copolymer. The results also suggest that there are two regimes of behavior for craze initiation under equibiaxial stresses, a behavior not manifested in the uniaxial stress relaxation experiments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
