The correction factor of Monterey No. 0/30 sample with fines content liquefaction resistance between cyclic triaxial and cyclic hollow cylinder tests

Abstract

Soil liquefaction is one of the most detrimental forms of earthquake-induced ground failure that can result in catastrophic damage to engineering structures. For the seismic safety evaluation of foundations and high-rise structures, it is the most critical way to assess liquefaction resistance. In this paper, an array number of isotropically consolidated undrained cyclic triaxial tests (CTT) and cyclic hollow cylinder tests (CHCT) have been performed to evaluate soil liquefaction resistance. Thirty-seven isotopically consolidated undrained cyclic triaxial tests and thirty-seven cyclic hollow cylinder tests were run on the uniform medium Monterey No. 0/30 sand and it is with four different percentages of fine content. By using cyclic triaxial and cyclic hollow cylinder tests for evaluating liquefaction resistance, it helps us better understand the relationship between two types of tests on uniform clean Monterey No. 0/30 sand and soil sample with five different percentages of fines content. Four different relative densities of 30%, 45%, 50%, and 60%, two confining pressure of 103 kpa and 207 kpa, and five cyclic stress ratios (0.15, 0.2, 0.25, 0.3, and 0.4) have been used for a series of cyclic triaxial tests and cyclic hollow cylinder tests. At the same relative densities of 30% and 60%, the correction factor between CTT and CHCT evaluated ranged from 0.46 to 0.63 on the uniform clean Monterey No. 0/30 sand. Statistical analyses were performed to formulate functional relationships for predicting the correction factor of soil liquefaction resistance between CTT and CHCT tests.