The Controlled Compound Layer of Ni-Coated Nitrided Pure Iron.

Abstract

In order not to sacrifice nitrided layer thickness and reduce brittle compound layer thickness, Ni-coated pretreatment was carried out with electrodeposition on a pure iron surface, followed by gas nitriding. The brittle compound layer thickness of duplex surface treated samples was reduced, and the nitrided layer thickness increased to 320 μm. The microhardness was 4 times harder, and the wear loss was reduced by 68% compared with the original material. The results indicate that Ni-coated pretreatment could effectively improve microhardness and wear resistance and realize the controlled microstructure of a brittle compound layer of pure iron without compromising nitrided layer thickness. Ni coating plays an important role in ammonia adsorption and decomposition, and in the transfer of active nitrogen atoms during nitriding.