Abstract
Silicon nitride fibers-reinforced silicon nitride matrix (Si3N4f/BN/Si3N4) composites with a BN interphase were fabricated by chemical vapor infiltration (CVI) and precursor infiltration pyrolysis (PIP). It is shown that PIP Si3N4f/BN/Si3N4 composites possessed better mechanical properties and achieved effectively interface debonding and fiber pull-out, whose flexural strength and fracture toughness can achieve 189 ± 17 MPa and 5.6 ± 0.6 MPa·m1/2, about twice and 1.5 times as much as those of CVI Si3N4f/BN/Si3N4 composites, respectively. Combining the micro-nano mechanical and macro-mechanical properties investigations, it is revealed that weakening the interfacial bond and achieving proper modulus matching relationship between fibers and matrix by PIP process could remarkably increase the mechanical properties of the Si3N4f/BN/Si3N4 composites, compared with CVI process.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
