Abstract
SummaryBrief comparison has been made between the alkaline cyanide and acid citrate gold plating baths. Operating conditions of a proprietary acid bath and their effect on cathode efficiency have been investigated. The low gold and nickel metal content generally adopted in these baths and the marked effect of slight variation in these metals on the characteristics of the deposit and trouble-free running of the process make regular analytical control important, as this affects economy of process and quality of product. Brief mention has been made of the application of atomic absorption spectrophotometry as a convenient means of analytical control. Plating distribution can be greatly improved by careful consideration of anode configuration and cathode jig design. The most suitable anode material was found to be gold strip, or as an alternative, platinized expanded titanium mesh. In the proprietary acid bath under consideration, carbon or stainless steel anodes were found to be unsuitable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.