Abstract

The Nb3+ ion substituted Sr hexaferrites (SrNbxFe12−xO19 (x = 0.00–0.08) hexaferrites (HFs)) were fabricated via a citrate-assisted sol-gel approach. X-ray powder diffractometer analysis affirmed the pureness of all products. The crystallite sizes of the products which were estimated from Scherrer equation were in the 36–40 nm range. The chemical component of the samples was proved by Energy-dispersive X-ray spectroscopy (EDX) and Elemental mapping. The hexagonal morphology of all products was confirmed by Field Emission Scanning Electron Microscopy (FE-SEM). The electrical conduction mechanisms and dielectric properties of a variety of Nb3+ions-substituted SrNbxFe12−xO19 HFs were investigated by a complex impedance system. Dielectric parameters such as conductivity, dielectric constant, dielectric loss, dielectric tangent loss and complex modulus, were studied at temperatures up to 120 °C in a frequency range varying from 1.0 Hz to 3.0 MHz for several Nb ratios. The frequency dependence of the conductivity was found to comply with the power law with diverse exponents at all frequencies studied here. Subsequently, incremental tendencies in dc conductivity with temperature indicate that the substituted Sr-HFs leads to a semiconductor-semimetal like behavior. This could be attributable to a feature of conduction mechanism which is based on the tunneling processes. Additionally, the dielectric dispersion pattern was also explained by Maxwell–Wagner polarization in accordance with the Koop’s phenomenological theory.

Highlights

  • M-type hexagonal ferrites are used in many special applications especially on communications, sensors, electronics and radar absorbing materials [1]

  • Dielectric losses of ferrites are necessary to be minimized for high frequency applications since the damping of the vibration of electrical dipoles occurs at higher frequency, ; eliminating the permittivity provides full penetration of the electric field

  • The SrNbxFe12−xO19 (0.00–0.08) HFs have been synthesized by a citrate-assisted sol-gel route

Read more

Summary

Introduction

M-type hexagonal ferrites are used in many special applications especially on communications, sensors, electronics and radar absorbing materials [1]. Dielectric losses of ferrites are necessary to be minimized for high frequency applications since the damping of the vibration of electrical dipoles occurs at higher frequency, ; eliminating the permittivity provides full penetration of the electric field For this purpose, M-ferrites or Stronium hexaferrites are substituted with different cations and rear earth ions such as Ba-Mn, Zn [15], Ni-Zr [16], La-Co [17], Nb-Zn [18], Nb [19], and Tb [20]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call