Abstract
The paper presents a proposed application of the Gunt ET794 turbine model and subsequent tests carried out in order to determine its usability in sample testing under erosive and corrosive conditions. The most important parameter measured during the tests was temperature before the T3 turbine as well as fuel consumption (propane-butane). Following measurement taking and determining conditions, an optimum place for sample attaching was established. CATIA and Autocad software was used to elaborate the sample attachment model. It has been assumed that the tested sample had 14mm in diameter and thickness of 4mm, while the protective coat will be 500μm max. The summary presents additional research and works, whose aim would be to improve the application of the Gunt ET794 as the test stand.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
