Abstract
The frictional behavior of two oils was measured in a cam/tappet friction apparatus using a direct acting bucket tappet geometry. One oil contained a soluble molybdenum friction modifier. The tappet was equipped with a removable friction disk, which allowed the frictional surface to be easily removed for surface characterization using surface profilometry, reflection infrared and XPS spectroscopies. The films consisted of varying amounts of inorganic phosphates, sulfates and sulfides with zinc, magnesium, and possibly molybdenum as cations. MoS2, expected because additives containing molybdenum and sulfur were present, was not detected. The detection limit was less than 0.1 atom percent Mo. The film formed by the friction modified oil was thinner, smoother and contained small amounts of molybdenum. While the smooth surface finish could reduce friction by improving microelastohydrodynamic lubrication, friction reduction could not be tied to any of the chemical structures detected in these experiments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
