The comparison of a discrete-continuous approach and a method of finite differences in solving the problem of unsteady-state heat and moisture transfer in the building envelope

Abstract

This article is devoted to the development of methods for calculating heat and humidity regime in the building envelope. The equation of steady-state thermal conductivity with boundary conditions of the third kind and the formula for calculating heat losses of a building based on the heat transfer equation have been considered. The equation of unsteady-state thermal conductivity as well as its solution using the discrete-continual approach has also been studied. The solution of the unsteady-state heat conductivity problem with invariable over time boundary conditions using the discrete-continuous approach was proposed by A.B. Zolotov and P.A. Akimov. The subsequent modernization of the solution was conducted by V.N. Sidorov and S.M. Matskevich. The unsteady-state equation of moisture transfer based on Fick’s second law using the theory of moisture potential is derived. The solution of the unsteady-state moisture transfer equation using the finite difference method according to an explicit difference scheme as well as the solution of the unsteady-state moisture transfer equation using the discrete-continuous approach is demonstrated. To prove the effectiveness of using the discrete-continuous approach in the area of the unsteady-state humidity conditions we compared the calculation results of the distribution of moisture in a single-layer enclosing structure made of aerated concrete using two methods of moisture potential theory. It was found that the difference in the results of calculation by the discrete-continual formula and by the method of finite differences does not exceed 3.2%.