Abstract
The ternary Zn-Ni-Co alloy coatings were electrodeposited on steel from chloride and sulphate baths. The deposition was carried out galvanostatically at different current densities at ambient temperatures from additives free baths with different ratios of Ni and Co. Corrosion behaviour of these coatings was evaluated from polarization measurements in 3% NaCl. The deposition current density exhibited small influence on the corrosion potential and corrosion current density of alloys obtained from both chloride and sulfate baths. On the other hand, [Co2+]/Ni2+] ion ratio showed a significant influence on corrosion behaviour of ternary alloy coatings, and this influence was more pronounced with alloys deposited from chloride baths. It was shown that increased corrosion protection of steel can be achieved by electrochemical deposition of ternary alloys that contained lower amount off the alloying elements, while the composition of the ternary alloy can be optimized by proper choice of the type and composition of the deposition bath.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
