Abstract
ABSTRACTThe combustion characteristics of anthracite, pine sawdust, and their blends were evaluated using a thermogravimetric analyzer (TGA). Pine sawdust was blended with anthracite in the range of 0–100 wt% to evaluate their combustion behavior. Pine sawdust combustion took place in two steps: between 211 and 385°C the volatiles were released and burned, and at 385–491°C char combustion takes place. In contrast, anthracite was characterized by only one combustion stage at 420–684°C. The anthracite and pine sawdust blends presented three combustion steps, corresponding to the sum of the anthracite and pine sawdust individual stages. In the blends combustion process, the temperature displacement occurred compared to anthracite and pine sawdust. There was only one meeting point, i.e., the ignition temperature, for anthracite (496°C). Ignition temperatures were 212°C for pine sawdust and 496°C for anthracite, 313, 311, and 311°C for 80:20, 70:30, and 60:40 (anthracite-to-pine sawdust mass ratio), respectively. The activation energy of blends combustion was lower compared with that of anthracite combustion. The results obtained can be explained by interaction effects when both anthracite and pine sawdust were blended in the combustion process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.