Abstract
Gradient strength and speed are limited by peripheral nerve stimulation (PNS) thresholds. The coil array method allows the gradient field to be moved across the imaging area. This can help reduce PNS and provide faster imaging for image-guided therapy systems such as the magnetic resonance imaging-guided linear accelerator (MRI-linac). The coil array is designed such that many coils produce magnetic fields, which combine to give the desired gradient profile. The design of the coil array uses two methods: either the singular value decomposition (SVD) of a set of field profiles or the electromagnetic modes of the coil surface. Two whole-body coils and one experimental coil were designed to investigate the method. The field produced by the experimental coil was compared to simulated results. The experimental coil region of uniformity (ROU) was moved along the z axis as shown in simulation. The highest observed field deviation was 16.9% at the edge of the ROU with a shift of 35 mm. The whole-body coils showed a median field deviation across all offsets below 5% with an eight-coil basis when using the SVD design method. Experimental results show the feasibility of a moving imaging region within an MRI with a low number of coils in the array. Magn Reson Med 78:784-793, 2017. © 2016 International Society for Magnetic Resonance in Medicine.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
