Abstract
Carbon nanotubes (CNTs) are generally considered as a promising particle reinforcement of incorporating advanced properties and characteristics into epoxy nanocomposites. This paper investigated the bonding performances of CNT-reinforced epoxy adhesively bonded joints on steel substrates using the single lap shear (SLS) tests. The bonding performances (including bonding strength, fracture strain, toughness, and failure mode) were studied with three adhesive thicknesses (1 mm, 0.5 mm, and 0.25 mm) and three CNT weight fractions (0%, 0.375%, and 0.75%). The experimental results indicated that thinner bondlines and higher CNT additions could significantly improve the bonding performances and modify the failure mode of CNT-reinforced epoxy adhesively bonded joints. However, the effects of adhesive thickness became less significant with the increase of CNT weight fractions. In addition, the plastic behaviour of CNT-reinforced epoxy, CNTs pulling-out, and the aggregation of CNTs were observed by scanning electron microscopy (SEM) image analysis on the fracture surfaces of CNT-reinforced epoxy adhesively bonded joints, indicating the potential effectiveness of the CNT reinforcement.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
