Abstract

ObjectivePreexisting severe cervical spinal cord compression is a significant risk factor in cervical hyperextension injury, and the neurological function may deteriorate after a slight force to the forehead. There are few biomechanical studies regarding the influence of pathological factors in hyperextension loading condition. The aim of this study is to analyze the effects of preexisting different types of cervical disc herniation and different degrees of compression on the spinal cord in cervical hyperextension.MethodA 3D finite element (FE) model of cervical spinal cord was modeled. Local type with median herniation, local type with lateral herniation, diffuse type with median herniation, and diffuse type with lateral herniation were simulated in neutral and extention positions. The compressions which were equivalent to 10%, 20%, 30%, and 40% of the sagittal diameter of the spinal cord were modeled.ResultsThe results of normal FE model were consistent with those of previous studies. The maximum von Mises stresses appeared in the pia mater for all 32 loading conditions. The maximum von Mises stresses in extension position were much higher than in neutral position. In most cases, the maximum von Mises stresses in diffuse type were higher than in local type.ConclusionCervical spinal cord with preexisting disc herniation is more likely to be compressed in hyperextension situation than in neutral position. Diffuse type with median herniation may cause more severe compression with higher von Mises stresses concentrated at the anterior horn and the peripheral white matter, resulting in acute central cord syndrome from biomechanical point of view.

Highlights

  • Cervical hyperextension injury is a common type of cervical injuries with potentially devastating outcomes [1, 2]

  • The maximum von Mises stresses in diffuse type were higher than in local type

  • Cervical spinal cord with preexisting disc herniation is more likely to be compressed in hyperextension situation than in neutral position

Read more

Summary

Introduction

Cervical hyperextension injury is a common type of cervical injuries with potentially devastating outcomes [1, 2]. The previous study using finite element analysis to study stress distribution in the spinal cord following cervical hyperextension indicated high localized stress at the anterior and posterior horn in the gray matter and the lower cervical levels experienced higher extension motion on acceleration/deceleration of the neck [8,9,10]. Greaves et al [12] compared the cord strain distributions for three injury mechanisms (transverse contusion, distraction and dislocation) by finite element analysis. These studies did not consider the potential effect of degenerative changes. There are few biomechanical studies regarding the influence of pathological factors in hyperextension loading condition

Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call