Abstract

Binaural hearing involves using information relating to the differences between the signals that arrive at the two ears, and it can make it easier to detect and recognize signals in a noisy environment. This phenomenon of binaural hearing is quantified in laboratory studies as the binaural masking-level difference (BMLD). Mandarin is one of the most commonly used languages, but there are no publication values of BMLD or BILD based on Mandarin tones. Therefore, this study investigated the BMLD and BILD of Mandarin tones. The BMLDs of Mandarin tone detection were measured based on the detection threshold differences for the four tones of the voiced vowels /i/ (i.e., /i1/, /i2/, /i3/, and /i4/) and /u/ (i.e., /u1/, /u2/, /u3/, and /u4/) in the presence of speech-spectrum noise when presented interaurally in phase (S0N0) and interaurally in antiphase (SπN0). The BILDs of Mandarin tone recognition in speech-spectrum noise were determined as the differences in the target-to-masker ratio (TMR) required for 50% correct tone recognitions between the S0N0 and SπN0 conditions. The detection thresholds for the four tones of /i/ and /u/ differed significantly (p<0.001) between the S0N0 and SπN0 conditions. The average detection thresholds of Mandarin tones were all lower in the SπN0 condition than in the S0N0 condition, and the BMLDs ranged from 7.3 to 11.5 dB. The TMR for 50% correct Mandarin tone recognitions differed significantly (p<0.001) between the S0N0 and SπN0 conditions, at –13.4 and –18.0 dB, respectively, with a mean BILD of 4.6 dB. The study showed that the thresholds of Mandarin tone detection and recognition in the presence of speech-spectrum noise are improved when phase inversion is applied to the target speech. The average BILDs of Mandarin tones are smaller than the average BMLDs of Mandarin tones.

Highlights

  • Binaural hearing involves using information relating to the differences between the signals that arrive at the two ears, and it can make it easier to detect and recognize signals in a noisy environment

  • The results show that the detection thresholds differed significantly between the S0N0 and SπN0 conditions both for the four tones of /i/ [i.e., /i1/, /i2/, /i3/, and /i4/] and for the four tones of /u/ [i.e., /u1/, /u2/, /u3/, and /u4/]

  • The use of the paired-samples t test is to analyze whether the 50% of the correct responses corresponding to the to-masker ratio (TMR) of Mandarin tone recognition were significantly improved in the SπN0 condition compared to the S0N0 condition, and the results revealed a significant difference

Read more

Summary

Introduction

Binaural hearing involves using information relating to the differences between the signals that arrive at the two ears, and it can make it easier to detect and recognize signals in a noisy environment. This phenomenon of binaural hearing is quantified in laboratory studies as the binaural masking-level difference (BMLD) [1]. Previous studies of the BMLDs of normal-hearing (NH) subjects for pure tones have shown that the mean detection threshold differences are functions of frequency; for example, Hirsh [4] found that the BMLDs of pure tones of 100, 200, 500, 1000, 2000, and 5000 Hz were 5.5, 13.6, 10.8, 7.6, 2.5, and 2.6 dB, respectively. Levitt and Rabiner [6] found a mean BMLD of 12.8 dB for monosyllable words, while Wilson et al [7] found a mean BMLD of 9.4 dB for spondaic words

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call