Abstract
Critical current of a silver-sheathed Bi-2223 tape using controlled-overpressure sintering has attained 201 A, which is equivalent to 493 A per 10 mm-width. The engineering current density is 21kA/cm2 , while the critical current density on the total filaments area is 56 . Critical currents are also improved noticeably at low temperatures and high magnetic fields normal to the tape plane. Typical critical currents have reached 500 A at 4.2 K in 5 T and 200 A at 20 K in 10 T. The highest critical currents of long wires currently have reached 195 A for 70 m and 191 A for 178 m. The wires with 200 A-class critical current are similar in mechanical properties to 150 A-class long wires commercially produced by Sumitomo Electric using the controlled-overpressure sintering. The microstructure study has predicted far higher potential of critical current, according to the confirmed remaining issues on the 200 A-class tapes; incomplete orientation order, aggregation of alkaline earth cuprates and inter-granular Bi-2212.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.