Abstract
Light-emitting diodes (LEDs) with a Mg-doped p-type Ga1−xInxN (0 ≤ x ≤ 0.07) spacer layer located between an undoped GaN spacer layer and the electron blocking layer are investigated. The LEDs are found to have comparable peak efficiency but less efficiency droop when the crystal quality of the p-type Ga1−xInxN spacer layer is well-controlled by lowering the growth temperature and by using a suitable In composition and Mg doping concentration. All LED samples with the p-type spacer layer show a smaller efficiency droop compared to a reference LED having an undoped GaN spacer. Among the sample sets investigated, an optical power enhancement of 12% at 111 A/cm2 is obtained when inserting a 5 nm-thick p-type Ga0.97In0.03N spacer layer. The results support that carrier transport is the key factor in the efficiency droop observed in GaN-based LEDs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.