Abstract
To study the behavior of macrocomponents and admixtures during the fractional crystallization of sulfide melts and the influence of As on noble metals in this process, we performed a quasi-equilibrium directional crystallization of melt of composition (at.%): Fe—35.5, Ni—4.9, Cu—10.4, and S—48.3, with admixtures of Pt, Pd, Rh, Ru, Ir, Au, Ag, As, and Co (each 0.1 at.%), which imitates the average (by Cu contents) compositions of massive ores at the Noril'sk Cu-Ni deposits. The following sequence of phase formation from melt has been established: mss (zone I) / mss + iss (zone II) / iss (zone III) (mss is (FezNi1–z)S1+δ, iss is (FexCuyNi1–x–y)zS1–z); it corresponds to the distribution of main elements along the sample (primary zoning). Distribution curves for macrocomponents in zones I and II of the sample were constructed, as well as the dependencies of their partition coefficients (k) between solid solutions and sulfide melt on the fraction of crystallized melt. The secondary (mineral) zoning resulted from subsolidus phase transformations has been revealed. Five subzones have been recognized: mss + cp (Ia) / mss + cp + pn (Ib) / mss + pc + pn (IIa) / mss + pc + pn + bn (IIb) / pc + bn + pn + unidentified microphases (III). Admixture species in the sample were studied: (1) admixtures dissolved in primary solid solutions and in main minerals resulted from solid-phase transformations and (2) admixtures forming their own mineral phases. The partition coefficients of Co, Rh, and Ru (mss/L), Ru, Ir, and Rh (mss/cp), and Co, Rh, and Pd (mss/pn) were determined. Minerals of noble metals have been recognized: Pt3Fe, PtFe, Au, (Ag,Pd), (Au,Pt), Ag, Ag3Cu, Au3(Cu,Ag,Pd,Pt), etc., and the regularities of their distribution in the sample have been established. It is shown that some noble-metal admixtures are prone to interact with As. Mineral arsenides and sulfoarsenides of noble metals produced during fractional crystallization have been recognized: PtAs2, Pd3As, (RhAsS), (IrAsS), and (Ir,Rh)AsS. The discovered drop-like inclusions of noble-metal arsenides suggest the separation of the initial sulfide-arsenide melt into two immiscible liquids. By indirect features, the micromineral inclusions are divided into primary, crystallized from melt, and secondary, produced in solid-phase reactions. The results of study are compared with literature experimental data obtained by the isothermal-annealing method and with the behavior of noble metals and As during the formation of zonal massive orebodies at the Noril'sk- and Sudbury-type deposits.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.