The beam commissioning of a CW high charge state heavy ion RFQ

Abstract

The SSC-LINAC project is launched at Institute of Modern Physics in China to develop one new linear accelerator (LINAC) injector for separated sector cyclotron (SSC). It includes a high charge state ion source, a CW RFQ and a DTL section, and is designed to accelerate ions up to 580keV/u. Now the ion source and the RFQ cavity have been installed in the main hall and the beam commissioning has been carried out. Two kinds of ions have been tested, 16O5+ and 40Ar8+. The experiment result of 16O5+ is: the measured beam current is 180μA at entrance of RFQ and 150μA at exit of RFQ. The output energy of 16O5+ is 141.89keV/u. The measured beam current is 210μA at entrance of RFQ and 198μA at exit of RFQ for 40Ar8+. The output energy of 40Ar8+ is 142.78keV/u. The experiment results agree with the design parameters of RFQ very well. This paper presents: the design consideration of beam dynamics, RF and cooling structure design; measurement of the cold model; high power test of RFQ and beam commissioning result.