Abstract
Brazing can be considered as an attractive method for joining sintered steel components since it can be integrated into the sintering process. The behavior and quality of the joint rely on the braze filler design. Among others, the interaction between the base material and the filler depends on the brazing temperature, wettability, infiltration ability, holding time, and sintering atmosphere. The use of this joining technique in components based on FeCuC is very common, and in this case the presence of a second liquid phase during sintering can limit the response of braze fillers. In this study, with the aim of analyzing the effect of the base steel composition, a NiCu-based brazing will be used together with different Fe-base substrates for sinter-brazing tests: iron is considered as the reference, FeC to assess the carbon addition effect, and finally FeCCu substrate tries to explain the interaction between the two liquid phases (the molten brazing alloy and the Cu transient liquid phase). Characterization of the final joint is supported with SEM and LOM microscopy, and EDS is used for determining the distribution of the alloying elements. Moreover, liquid phase features such as infiltration capacity and diffusion are evaluated by using image analysis. On the other hand, the study is completed with wetting evaluation of the brazing alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
