The Auk Field, Block 30/16, UK North Sea

Abstract

Abstract The Auk field is located in Block 30/16 at the western margin of the Central Graben. Oil is contained in a combination stratigraphic and structural trap which is sealed by Cretaceous chalk and Tertiary claystones. An oil column of up to 400 ft is contained within Rotliegend sandstones, Zechstein dolomites, Lower Cretaceous breccia and Upper Cretaceous chalk. Production has taken place since 1975 with 80% coming from the Zechstein, in which the best reservoir lithology is a vuggy fractured dolomite where porosity is entirely secondary due to the dolomitization process and leaching of evaporites. Both Rotliegend dune slipface sandstones, and the Lower Cretaceous breccia comprising porous Zechstein clasts in a sandy matrix, also contribute to production. Poor seismic definition of the reservoir results in reliance on well control for detailed reservoir definition. The field has an estimated ultimate recovery of 93 MMBBL with 13 MMBBL remaining at the end of 1988. The Auk field is situated in Block 30/16 of the Central North Sea about 270 km ESE from Aberdeen in 240-270 ft of water (Fig. 1). The field covers an area of about 65 km2 and is a combination of tilted horst blocks and stratigraphic traps, located at the western margin of the South West Central Graben. The Auk horst is about 20 km long and 6-8 km wide, with a NNW-SSE trend. It is bounded on the west by a series of faults with throws of up to 1000 ft, and the eastern boundary fault has a throw of 5000 ft in the north reducing to zero in the south (Fig. 2). The horst is a westward tilted fault block in the north which grades into a faulted anticline in the south. The Auk accumulation is largely contained within Zechstein dolomites and is ultimately sealed by Cretaceous chalk which overlies the base Cretaceous erosion surface. An E-W cross-section of the field is illustrated by Fig. 3. Auk was the first of the alphabetical sequence of North Sea sea-bird names used for Shell/ Esso fields.