Abstract
Gas insulated transmission line (GIL) is widely used for power transmission in special geographical environment such as river crossing, mountain crossing and city tunnel crossing scenarios. Because of its totally enclosed structure, it is difficult to locate the fault position when the internal breakdown discharge occurs. Fault location by using the ultrasonic wave aroused by discharge is an efficient method for GIL maintenance. This paper reports the experimental and theoretical results of attenuation and propagation law of ultrasonic signal in GIL. An ultra-high voltage (UHV) GIL model was set up to simulate the geometry and material conditions of real GIL. The common lead breaking signal was adopted to generate ultrasonic source, and the propagation velocity and attenuation coefficient of ultrasonic wave were obtained. The experimental results show that the attenuation coefficient of ultrasonic wave on GIL linear unit is about 0.234 dB/m, and its propagation velocity is about 3.3 km/s. But the attenuation level of ultrasonic wave is much higher when it passes through the epoxy insulators or expansion joints. The validity of the method is verified by the creeping discharge test on the GIL model. In order to analyze the propagation path of ultrasonic wave, the relationship between the path and time is calculated and the shortest propagation time is obtained. The results of this research provide support for the fault location of GIL by ultrasonic wave.
Highlights
Gas insulated transmission line (GIL) is a kind of highvoltage, high-current and long-distance pipeline electric power transmission equipment [1]–[3]
1) The attenuation degree of ultrasonic signal in ultra-high voltage (UHV) GIL is exponentially related to the propagation distance
When the ultrasonic signal passes through the insulator and expansion joint, the signal amplitude is mostly decayed
Summary
Gas insulated transmission line (GIL) is a kind of highvoltage, high-current and long-distance pipeline electric power transmission equipment [1]–[3]. Data-driven fault location approaches have been widely studied in previous literatures [19], [20], such as a hierarchical event detection method based on spectral theory of multidimensional matrix for power system [21], zerosequence current suppression strategy with common mode voltage control [22], [23]. Most of these studies are based on. According to the characteristics of phase and amplitude of multiple ultrasonic signals, the discharge fault can be located
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
