Abstract
The essential features of transmission-line modeling (TLM) and its relevance to EMC problems are briefly described. The manner in which an EMC problem can be modeled using TLM is outlined, and three important applications are presented. Results are shown for a spherical dipole antenna placed near conducting walls, where a detailed model of the antenna and the surrounding space is used to determine the radiation resistance and its variation with proximity to the walls. The electromagnetic emission pattern from a typical device under test placed in a practical environment is determined by simulation. The current induced on wires placed on either side of a thin conducting plate is obtained by TLM, and the results are compared with measurements. Although a relatively coarse mesh of points has been used, the comparisons are very encouraging. Further developments to the code, which will allow a more efficient treatment of fine features and enhance the poser of the method to solve realistic EMC problems, are discussed. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Electromagnetic Compatibility
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.