The Application of Solid Source Diffusion in the Vertical Replacement-Gate (VRG) MOSFET

Abstract

AbstractWe discuss the first use of solid source diffusion (SSD) to form shallow, self-aligned SDEs in a novel device known as the Vertical Replacement-Gate (VRG) MOSFET. This is the only MOSFET ever built that combines 1) a gate length controlled precisely through a deposited film thickness, independently of lithography and etch, and 2) a high-quality gate oxide grown on a single-crystal Si channel. The use of SSD in this novel geometry allows us to transform the precise gate length control afforded by the VRG process into precise, lithography-independent channel length control. In the VRG-nMOS process, silicon nitride offset spacers separate the phosphosilicate glass (PSG) SSD dopant sources from the polysilicon gate. These offset spacers, whose critical dimensions are also controlled by film thicknesses, allow us to precisely tune the gate-source and gate-drain overlaps in order to optimize the capacitance/series resistance tradeoff. These parasitic overlap capacitances have precluded the high-frequency operation of many previous vertical MOSFETs. In this paper, we discuss the SIMS and sheet resistance characterization of shallow phosphorus junctions formed in one-dimensional SSD experiments. We will also discuss the scanning capacitance characterization of two-dimensional doping profiles of VRG-nMOSFETs with gate lengths down to 50 nm.