Abstract
Abstract Paper relics are important historical and cultural heritages. However, the paper relics are at risk of ageing, damage and disappearance. In order to delay the aging of paper, improve the strength of paper, solve the problem of poor permeability and stability of traditional resins to paper, the polyurethane was synthesized by polydimethylsiloxane (HTPDMS) and low molecular weight hexamethylene diisocyanate (HDI) trimer, and the chemical and physical properties of paper samples were tested. Results showed the paper coated by HTPDM-modified polyurethane liquid had good mechanical property, the tensile strength was increased from 1105 to 3299 N/m, the folding endurance was increased from 20 to 1024; and had good gloss and brightness; after thermal aging, coated paper can effectively maintain tensile strength, delay folding resistance and tearing strength loss; after acid stability test, the loss ratio of tensile strength was decreased from 34.2 % to 15.7 %, folding endurance was decreased from 57.1 % to 9.7 %; after alkali stability test, the loss ratio of tensile strength was decreased from 29.3 % to 6.6 %, folding endurance was decreased from 82.9 % to 22.0 %. Therefore, the prepared polyurethane material has great application prospects in the protection of paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.