The application of heat transfer analysis in condition monitoring system of wind generator

Abstract

Effective cooling is required in power generation, processing, and distribution to avoid failure that could occur during operations. As heat loads continue to increase, manufacturers of wind turbines are turning to improve the cooling system to remove high intensity heat loads from many active parts particularly in the generator part. Wind generators need an effective cooling system due to the large amount of heat that is released during power production. Many large wind turbines (more than 5MW rated power) particularly offshore wind turbines where the water is available, heat exchangers with water-air cooling system is used, in which the water is utilized to cool the hot air. This type of heat exchangers are desired, since they are more efficient and reliable than the air-air heat exchangers, which are used in small wind turbines. Because of the growing number of failures that occurred in wind turbine generators due to high generator's temperatures owing to power losses of generator, applying condition monitoring system on wind generators depending on heat transfer analysis through the heat exchangers of wind generators plays an effective function. This helps avoid failures, decrease the potential shutdowns during running, and maintain wind turbines to be protected. In this paper new methodology has been applied by considering the heat transfer and fluid mechanics analysis through a heat exchanger of wind generator, which uses water to air cooling system. Case study based on data collected from actual measurements demonstrates the adequacy of the proposed model.