Abstract
A low-cost microelectromechanical (MEMS) microphone array was developed to investigate and localize aeroacoustic sources. A 1 m by 1 m array was designed as a portable measurement apparatus capable of locating noise sources from small rotating wind turbines in conjunction with open-jet wind tunnels or field measurements. Beamforming algorithms were implemented to allow simulation of sound sources and conditions expected to be encountered in testing. Array testing with a known monopole source, multiple sources and different frequencies located the mainlobes accurately at a number of frequencies and distances. A rotating sound source was located spatially and tracked using conventional beamforming. Experimental results from the acoustic testing of a 1.3 metre rotor diameter wind turbine in an open-jet wind tunnel indicated strong evidence of trailing edge noise at freestream velocities of 4.5 m/s and 5.5 m/s. Source maps for the 5.5 m/s tests reveal that the turbine's aeroacoustic emissions are most prevalent at the outer portions of the radius, but not necessarily at the tip. The azimuthal location of the greatest sound pressure levels was found to be roughly 120° to 130°, measured from the upward vertical, for most test conditions. An analytical model confirmed this sector to be the approximate expected azimuthal location of the source in the time-averaged source maps.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
