Abstract
A model for the acoustic properties of a plate perforated with slots of rectangular shape is proposed. The model is based on known expressions for the complex density and compressibility of a pore of rectangular shape together with the radiation impedance of a rectangular shaped piston in a baffle. For the so-called end correction of a rectangular aperture in a plate, an approximate solution is shown to fit an exact solution for the imaginary part of the radiation impedance, the latter solution based on the work of Lindemann [J. Acoust. Soc. Am, 55, 708-717 (1974)]. Two different procedures are tested to calculate the mutual influence of the apertures on the end correction, the one calculating the mutual impedance of neighboring pistons in the plate, the other by calculating the end correction of a piston placed in the end of an infinitely long tube. The model is used calculating the input impedance and absorption coefficient of a Helmholtz resonator with such a plate, comparing with measurement results. The fit between predicted and measured results, using plates with narrow slits, is good, but it is believed that the model also cover a wider range of dimensions for such a slotted plate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.