Abstract
A widely used risk prediction tool, the revised NIOSH lifting equation (RNLE), provides the recommended weight limit (RWL), but is limited by analyst subjectivity, experience, and resources. This paper describes a robust, non-intrusive, straightforward approach to automatically extract spatial and temporal factors necessary for the RNLE using a single video camera in the sagittal plane. The participant’s silhouette is segmented by motion information and the novel use of a ghosting effect provides accurate detection of lifting instances, and hand and feet location prediction. Laboratory tests using 6 participants, each performing 36 lifts, showed that a nominal 640 pixel × 480 pixel 2D video, in comparison to 3D motion capture, provided RWL estimations within 0.2 kg (SD = 1.0 kg). The linear regression between the video and 3D tracking RWL was R2 = 0.96 (slope = 1.0, intercept = 0.2 kg). Since low definition video was used in order to synchronise with motion capture, better performance is anticipated using high definition video.Practitioner's summary: An algorithm for automatically calculating the revised NIOSH lifting equation using a single video camera was evaluated in comparison to laboratory 3D motion capture. The results indicate that this method has suitable accuracy for practical use and may be, particularly, useful when multiple lifts are evaluated.Abbreviations: 2D: Two-dimensional; 3D: Three-dimensional; ACGIH: American Conference of Governmental Industrial Hygienists; AM: asymmetric multiplier; BOL: beginning of lift; CM: coupling multiplier; DM: distance multiplier; EOL: end of lift; FIRWL: frequency independent recommended weight limit; FM: frequency multiplier; H: horizontal distance; HM: horizontal multiplier; IMU: inertial measurement unit; ISO: International Organization for Standardization; LC: load constant; NIOSH: National Institute for Occupational Safety and Health; RGB: red, green, blue; RGB-D: red, green, blue – depth; RNLE: revised NIOSH lifting equation; RWL: recommended weight limit; SD: standard deviation; TLV: threshold limit value; VM: vertical multiplier; V: vertical distance
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
