Texturing of monocrystalline silicon wafers by HF-HCl-H2O2 mixtures: Generation of random inverted pyramids and simulation of light trapping in PERC solar cells

Abstract

Solutions containing hydrofluoric acid (HF), hydrochloric acid (HCl), and hydrogen peroxide (H2O2) were investigated as novel acidic, NOx-free etching mixtures for texturing of monocrystalline silicon wafers. High etch rates of up to 13.3nms−1 were observed at room temperature, which are comparable to the etch rates of KOH-IPA solutions. The silicon surface was investigated by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM), indicating pyramidal textures for diamond wire and SiC-slurry sawn as well as saw-damage etched (polished) wafers. Non-stirred baths generate random pyramidal structures while constantly stirred solutions generate novel random inverted pyramidal surface structures. The light trapping efficiency of wafers etched by the HF-HCl-H2O2 solutions was compared by UV/vis-reflectivity measurements to KOH/i-propanol specimens indicating lower reflectivities for the HF-HCl-H2O2-treated samples. Using the ‘wafer ray tracer’ (pvlighthouse.com) the light absorption properties of monomodal and random inverted pyramid structures were simulated and compared to well-known random and monomodal textures for PERC solar cells, clearly indicating the best performance for random inverted pyramids. Besides, simulation of a PERC solar cell on a roof top at our university was performed, indicating improved performance, especially for random inverted pyramid textures.