Abstract
Nanocomposite thin films of titanium silicon nitride were deposited by sputtering on R-plane sapphire substrates. The effects of silicon addition and negative substrate bias on the texture development of the films were studied systematically by varying the bias voltage in the range −20 to −200 V. The accompanying changes in the microstructure and growth morphology of the phases in these films were investigated in detail using X-ray diffraction and a atomic force microscopy. In addition, the effect of texture on the mechanical properties of the films was also investigated using nanoindentation technique. Pure TiN films deposited without Si exhibit a strong (1 1 1) preferred orientation, while with addition of Si, the orientation of the films changes from (1 1 1) to (2 0 0). Meanwhile the surface morphology of these films changed from a pronounced columnar microstructure to a dense, fine-grained structure. The effect of negative substrate bias voltage applied during deposition also resulted in a similar change of film orientation and microstructure and leads to the increase in hardness of the films from 21 to 40 GPa, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.