Tetrazine-based dynamic covalent polymers as degradable extraction materials in sample preparation

Abstract

BackgroundCurrent trends in Analytical Chemistry are highly focused on the introduction of new extraction materials with a high selectivity towards the target analytes, high extraction capacity as well as sustainable characteristics. In this context, the introduction of smart materials able to respond to an external stimulus constitutes a promising approach in the field. However, investigations regarding the development of such stimuli-responsive polymers have been basically centered on their synthesis and the control of their properties, and hardly on exploiting such properties to generate polymers that, once their extraction function is fulfilled, they can be degraded into fragments with little or negligible toxicity, or even into their constituent monomers for an efficient recycling. ResultsThe applicability of a degradable and recyclable dynamic covalent polymer based on the use of tetrazine as a linker was assessed as sorbent for the extraction of a group of 37 persistent organic pollutants, including 10 polycyclic aromatic hydrocarbons, 11 organochlorine pesticides, 14 polychlorinated biphenyls, and 2 antibacterial agents, from water samples. A microdispersive solid-phase extraction procedure was developed for the selective extraction of the target analytes, while their separation, determination, and quantification were achieved by gas chromatography coupled to mass spectrometry. The optimized procedure was validated for seawater and wastewater obtaining mean relative recovery values between 72 and 112 % for almost all the analytes, with satisfactory relative standard deviation values (<18 %). After extraction, the polymer could be degraded by adding the amino acid L-tyrosine, being possible a quantitative recovery of the initial functional monomer. SignificanceA responsive polymer based on the chemical versatility of the tetrazine ring was used as sorbent in sample preparation providing excellent results, showing good physicochemical properties and the ability to be degraded after use. This polymer constitutes an interesting alternative to reduce chemical waste through the recycling of monomers, contributing to the development of more sustainable analytical methodologies.